nxp 150 mhz, 32-bit cortex-m3 ? microcontrollers lpc1800 key features 4 150 mhz, 32-bit arm cortex-m3 4 up to 1 mb dual-bank flash 4 up to 200 kb sram 4 up to 4 kb eeprom 4 memory protection unit (mpu) 4 two high-speed usb 2.0 interfaces, on-chip high-speed phy 4 10/100t ethernet mac with mii and rmii interfaces 4 lcd controller with 1024 x 768 pixel display resolution 4 innovative quad spi flash interface (spifi) 4 state confgurable timer (sct) subsystem 4 two can 2.0b 4 aes decryption with 128-bit secure otp key storage 4 up to 164 gpio 4 pin-compatible with the lpc4300 series additional features 4 8-channel gpdma controller 4 two 8-channel, 10-bit adcs and one 10-bit dac (400 k samples per second) 4 motor control pwm and quadrature encoder interface 4 four uarts, smart card interface 4 two fast-mode i 2 c, two i 2 s, two ssp/spi 4 temperature range: C40 to +85 oc lower power and high performance the lpc1800 - designed using nxps ultra low-leakage 90 nm process technology - is optimized for low power operation at very low frequencies all the way through to 150 mhz maximum performance from either flash or ram. this performance provides maximum connectivity and bandwidth options for a wide range of demanding applications including power conversion, lighting, motor control and audio applications. large internal memory the lpc1800 offers the industrys largest on-chip sram for a cortex-m3 with up to 200 kb provided in multiple banks. a fexible dual-bank flash architecture offers the highest reliability in-application re-programming, and allows for non-stop flash operation. extensive peripheral set the lpc1800 also features two new innovative peripherals: a fexible quad-spi interface and a state confgurable timer subsystem. the lpc1800 is the frst microcontroller to provide a seamless high-speed interface that will connect with virtually all spi and quad-spi manufacturers. the lpc1800s state confgurable timer subsystem comprises of a timer array with a state machine enabling complex functionality including fastest cortex-m3 mcu, largest sram, high speed usb the lpc1800 series of low power, high-performance cortex-m3 mcus features frequencies up to 150 mhz and fexible dual-bank flash for the highest reliability in-application re-programming.
event controlled pwm waveform generation, adc synchronization and dead time control. this timer subsystem gives embedded designers increased fexibility to create user-defned wave-forms and control signals. additional peripherals available on the lpc1800 include two hs usb controllers, an on-chip hs phy, a 10/100t ethernet controller with hardware enabled tcp/ip checksum calculation, a high-resolution color lcd controller, and aes decryption including two 128-bit secure otp memories for key storage. versions with aes encryption are available on request. for more information, please visit www.nxp.com/microcontrollers lpc1800 block diagram lpc18xx flash up to 1 mb dual bank sram up to 200 kb rom rom / otp bus system arm cor tex-m3 up to 150 mhz 4 x uart 2 x ssp/spi 2 x i 2 c 2 x i 2 s 2 x hs usb 2.0 ethernet mac spi flash interface 2 x can 2.0b lcd controller sdio external mem ctrl state config timer 4 x 32-bit timers rtc alarm timer mpu nvic wic debug trace motor ctrl pwm quad enc interface system security configurable interf aces memor y core otp key storage 2 x 8 ch 10-bit adc 10-bit dac aes decryption brownout detector gpdma usb pll cpu pll irc audio pll power-on reset watchdog timer interf aces timers analog selection guide type memory lcd ethernet usb spi flash interface state confg timer subsys adc i/o pins ext bus interface temp. range options package flash ram lpc1810 136 ? ? 2x 4-6ch 10b 50-64 8-16 -40 to +85 c lqfp144, tbga100 lpc1812 512 (1x512) 104 ? ? 2x 4-6ch 10b 50-64 8-16 -40 to +85 c lqfp144, tbga100 lpc1813 512 (2x256) 104 ? ? 2x 4-6ch 10b 50-64 8-16 -40 to +85 c lqfp144, tbga100 lpc1815 768 (2x384) 136 ? ? 2x 4-6ch 10b 50-64 8-16 -40 to +85 c lqfp144, tbga100 lpc1817 1024 (2x512) 136 ? ? 2x 4-6ch 10b 50-64 8-16 -40 to +85 c lqfp144, tbga100 LPC1820 168 1 ? ? 2x 4-6ch 10b 50-64 8-16 -40 to +85 c lqfp144, tbga100, lqfp100 lpc1822 512 (1x512) 104 1 ? ? 2x 4-6ch 10b 50-64 8-16 -40 to +85 c lqfp144, tbga100 lpc1823 512 (2x256) 104 1 ? ? 2x 4-6ch 10b 50-64 8-16 -40 to +85 c lqfp144, tbga100 lpc1825 768 (2x384) 136 1 ? ? 2x 4-6ch 10b 50-64 8-16 -40 to +85 c lqfp144, tbga100 lpc1827 1024 (2x512) 136 1 ? ? 2x 4-6ch 10b 50-64 8-16 -40 to +85 c lqfp144, tbga100, lqfp100 lpc1830 200 ? 2 ? ? 2x 8ch 10b 80 16-32 -40 to +85 c bga256, bga180, bga100, lqfp144 lpc1833 512 (2x256) 136 ? 2 ? ? 2x 8ch 10b 80 16-32 -40 to +85 c bga256, bga180, bga100, lqfp144 lpc1837 1024 (2x512) 136 ? 2 ? ? 2x 8ch 10b 80 16-32 -40 to +85 c bga256, bga180, bga100, lqfp144 lpc1850 200 ? ? 2 ? ? 2x 8ch 10b 80 16-32 -40 to +85 c lqfp208, bga256, bga180 lpc1853 512 (2x256) 136 ? ? 2 ? ? 2x 8ch 10b 80 16-32 -40 to +85 c lqfp208, bga256, bga180 lpc1857 1024 (2x512) 136 ? ? 2 ? ? 2x 8ch 10b 80 16-32 -40 to +85 c lqfp208, bga256, bga180 www.nxp.com ? 2011 nxp semiconductors n.v. all rights reserved. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. no liability will be accepted by the publisher for any consequence of its use. publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. date of release: june 2011 document order number: 9397 750 17140 printed in the netherlands
|
